Laser Cleaning Systems are instruments that carry a great deal of power. They can easily take away rust, paint, grease and similar materials. Many factories, workshops and places restoring art use these machines.

Still, similar to other machines, laser cleaners may experience issues from time to time. If you understand the potential mistakes and ways to fix them, you can save both your time and money. Here, let’s discuss some frequent issues and how to address them easily.

Explanation of problems in laser cleaners

Laser cleaning uses the latest technology. It relies on strong beams, different sensors and cooling systems. Each component in the motor should move smoothly with the rest. A bad result can occur if one or more machines are not adjusted well.

We can explore the issues that crop up most often and their solutions.Recognizing common issues and learning about the Limitations of Laser Cleaning Machines lets you safely and effectively use your machine.

Table of Contents

1. The laser beam is not working.

Problem: Even after pulling the trigger, the laser does not shoot.

Possible Causes:

Supply of power to the systems
The safety lock is not switched on.
Problem with the trigger switch
The software program has not been launched yet.

The solution :

Examine whether the machine is hooked up correctly
Check that all safety switches are switched off.
Restart the software and the machine or computer.
Check the hand-held gun for any damage.

2. Low efficiency in cleaning

Problem: After turning on the laser, the cleaning jets do not work properly.

Possible Causes:

Filthy lens or mirror
Low setting
Focusing on the wrong place
If you use the incorrect type of transport

Solutions :

Use a lens cloth made of soft fibers to clean the optics.
Raise the power of the laser step by step.
Make sure the surface you are traveling over matches the level of focus.
Apply the proper method to deal with rust, paint, or grease.

3. The body overheats during exercise.

Problem: A high temperature causes the machine to fail.

Possible Causes:

Problems with the system that removes heat
Plugged air vents
Working for long stretches without pauses

Solution:

Inspect the cooling fan and water-cooling system (if the model is water-cooled).
Be sure to clean all the air vents and filters.
Let the machine rest for a moment to reduce its temperature.
Store the paintings in an environment where it is neither hot nor moist.

4. Messages One Sees on the Screen

Problem: The device displays an error message or warning on the screen.

Possible Causes:

Software crash
Cables that are not secured tightly
The equipment inside the computer is no longer working.

How to Solve the Problem:

Try turning off the machine and then turning it on again.
Review all cables and make sure all connections are secure.
Email technical support if your issue persists even after the steps outlined above.

5. Not all beams are produced in the same amount.

Problem: While being cleaned, the beam becomes weaker or begins to flicker.

Possible Causes:

Bent or broken fiber optic cable
There are often problems with the power supply.
There is a malfunction in the laser source.

Methods to Resolve the Issue:

Look for any bends or signs of damage on the fiber cable.
Ensure you are using an electricity source that is steady and reliable.
If you can, do a test on your machine personally

Maintenance tips for cars

Clean your lenses using the suitable materials at least once a week.
Check the cables to make sure there is no damage.
If your car has a cooling fluid, take some time to check it.
It is important to continuously check and fix the camera’s focus.
Regularly update the software on your computer.
Locate the machine where it will not pick up dust.

Understand where your skill stops.

While laser cleaning systems do an excellent job, there are still limitations to their use. You should also be aware of the boundaries of Laser Cleaning Machines. These include:

High price when buying
If you use thick layers, performance will be slow.
Not suitable for surfaces that are not metal.
Requires employees with training to work safely
Sensitive to the effects of dust or moisture
This knowledge can stop issues from happening in the first place.

How do you Know When you Need Help?

It is time to contact a technician if:

The machine did not turn on.
Smoke or smell is coming from parts of the house.
The company’s software breaks down multiple times.
Cleaning results do not change much after a simple evaluation.

Many Laser Cleaning Systems provide support after the sale. You should use this service when you have problems that require specialized help.

Conclusion

Laser cleaners are both clever and mighty. Yet, they remain machines that are capable of breaking down occasionally. The good side is: you can often fix most issues quickly by checking and maintaining your car. Recognizing main issues and knowing about the usage and boundaries of Laser Cleaning Machines lets you effectively use your machine. If you maintain your Laser Cleaning Systems well and fix problems fast, they will continue to run superbly.